ACCO-NT

• support for up to 255 access control modules
• ability to create up to 255 partitions in 1 control panel (up to 255 access control modules can be defined in one partition)
• ability to add up to 16 passageways (up to 16 partitions can be defined in each passageway)
• 8 programmable zones on the control panel board, expandable to 264 zones
• 8 programmable outputs on the control panel board, expandable to 264 outputs
• 2 high-current outputs on the control panel mainboard, with power output functionality (current-carrying capacity of each output: 0.5 A / 12 V DC ± 15%)
• ability to connect up to 32 expanders directly to the control panel: INT-E, INT-O, INT-PP, INT-RX-S
• electrical protection of all zones and outputs as well as communication buses
• connector for APS-412 or APS-612 backup power supply
• USB MINI-B port for configuring network settings and updating firmware of the control panel without having to disassembly it
• LED status indicators for:
○ communication between the control panel and the RS-485 buses, computer and server
○ power supply circuit
○ microSD card
• events are stored in non-volatile memory of the control panel:
○ up to 1,000,000 events from the control panel
○ 100,000 events from each access control module
• number of users: 8,000 in the control (65,000 in the whole system)
• each user can be assigned:
○ code
○ passive transponder (e.g. in the form of proximity card or key tag)
○ Dallas chip (iButton)
○ remote control keyfob
• ability to assign 4 identifiers and 1 keyfob to a single user
• access to certain partitions within a specified time interval
• ability to block/unblock partition at a specified time, or as per access schedule
• implementation of logic functions on zones and outputs
• support for turnstiles
• ability to control the control panel outputs by using keyfobs
• optional installation of the control panel in OPU-3 P or OPU-4 P enclosureSATEL failure to the control panel (INTEGRA Firmware 1.16 or newer)