• 4 detection circuits
• supports remote and virtual panels (using CSP-ETH interface)
• 4 control inputs with functionality programmed by the installer
• 4 outputs programmed by the installer which enable interaction with other systems
• supports fire and damage transmission devices
• built-in backup power supply interfacing with a single battery 12 V and AUX 24 V and 18 V power outputs
• unique Swirl chamber accelerates smoke detection
• test fires detected: TF-1 to TF-5 acc. to EN54-7 and TF-1, TF-6 and TF-8 acc. to ISO/TS 7240-9:2006
• A1R heat detector in conformance with EN54-5
• stainless-steel precision filter
• failure signalling – contamination of measuring chamber
• simple detector installation at the base of DB-100
• possibility of connecting an external status indicator
• DB-100 socket can be surface mounted
• PG-16 cable glands or Ø16 tubes can be used
• external mounting clips enable the installation without the need to perforate the bottom of the base
• DB-100 socket is additionally protected against water seeping in from the ceiling
• 4 detection circuits
• built-in LCD for easy day-to-day operation and system programming
• supports remote panels and virtual panels (using CSP-ETH interface)
• 4 control inputs with functionality programmed by the installer
• 4 outputs programmed by the installer which enable interaction with other systems
• supports fire and damage transmission devices
• built-in backup power supply interfacing with a single battery 12 V and AUX 24 V and 18 V power outputs 24 V i 18 V
• A1R heat detector in conformance with EN54-5
• simple installation of the detector at the base of DB-100
• possibility of connecting an external status indicator
• LED visual signalling system
• aesthetic appearance suitable for the majority of interiors
• simple installation
• built-in LCD for easy day-to-day operation and system programming,
• built-in backup power supply with a single battery 12 V 17 Ah, and AUX 24 V and 18 V power outputs
• selection of 32 signal sounds
• possibility of emitting two different sounds
• volume control
• high base for installation in installation tubes
• unique Swirl chamber accelerates smoke detection
• test fires detected: TF-2 to TF-5 acc. to EN54-7 and TF-1 and TF-8 acc. to ISO/TS 7240-9:2006
• stainless-steel precision filter
• failure signalling – contamination of measuring chamber
• simple detector installation at the base of DB-100
• possibility of connecting an external status indicator
• supports DMP-100, DRP-100 and DCP-100 detectors
• a detector may be locked in the mounting base which prevents it from being dismantled without the use of tools,
• additional earth cable clamp (PE) which facilitates the mounting of the system using shielded cables
نشانی: تهران، خیابان شهید بهشتی، خیابان کاووسی فر، پلاک 23
تلفن: 22276534-021 22255495-021 info 'at' sahba-co 'dot' com