• converts standard (NO, NC) detector into addressable detector
• installs inside detector enclosure
• compatible with INT-ADR, CA-64 ADR addressable bus module
• ability to record up to 32 messages
• triggering messages with the INTEGRA alarm control panel or other external devices
• built-in amplifier allows direct connection of a loudspeaker
• line output for easy connection to a PA system
• built-in USB port for quick programming with a computer
• simulation of analog telephone line over GSM network
• 4 programmable inputs for triggering of messaging and/or GPRS reporting
• telephone line monitoring conversion to GPRS transmission, compatible with any panel
• CallerID forwarding to simulated telephone line (DTMF and FSK systems)
• PAGER (DTMF) messaging conversion to SMS
• support for CLIP test transmissions
• SMS reception for central monitoring station
• external modem functionality for INTEGRA panels
• RS-232 port for module programming and modem functionality
• RS-232 interface installed on keypad bus
• GUARDX communication
• RS-232 based monitoring support
• open protocol for systems integration
• dedicated independent addressable detector bus
• support for addressable detectors based on CA-64 ADR-MOD module
• capability of system expansion with up to 48 addressable zones
• ability to connect to RS-485 bus (firmware update via the bus)
• two-way transmission of audio signals between the intercoms and the telephone line
• two-way communication activation button
• up to 4 INT-AVT panels may be connected to the INT-AV module
• transmission of signals from a telephone dialer via GSM network
• conversion of PAGER messages to SMS
• remote module configuration via GPRS
• remote programming of control panels via GPRS - "remote RS-232 port" function
• remote update of module firmware
• telephone line supervision and automatic switch-over to GSM at fault
• telephone reporting conversion to SMS, GPRS and CSD formats
• 4 module inputs with ability to start voice / SMS messaging and to trigger event transmission when reporting
• 3 outputs with remote control capability
• RS-232/485 interface connected to keypad bus
• communication with the GUARDX program
• monitoring support by RS-232
• open protocol for integration with other systems (requires implementation of RS-232 protocol on the third-party system side)
• galvanic isolation protecting against the potential difference
• system expansion with 8 zones
• support for:
○ NO, NC
○ EOL, 2EOL/NO, 2EOL/NC (alarm control panels only)
○ 3EOL (INTEGRA Plus only)
• programmable EOL resistance value (alarm control panels only)
• support for vibration and roller shutter detectors (alarm control panels only)
• ability to connect to RS-485 bus (firmware update via the bus)
• alarm acoustic verification module enables the elimination of false alarms
• local broadcasting of messages from the monitoring station
• two-way transmission of audio signals between the intercoms and the telephone line
• works with up to 4 intercoms working in half duplex mode
• microphone sabotage detection function
• GSM backup for telephone line
• support for two SIM cards
• telephone line supervision with automatic switching to GSM
• 4 programmable inputs
• telephone reporting conversion to SMS/GPRS/CSD
• 3 outputs for DTMF/SMS/CLIP remote control
• pager (DTMF) to SMS conversion
• CLIP test transmissions
• modem feature for INTEGRA panels unit configuration with buttons or PC
• INTEGRA keypad and expansion buses to fiber-optic conversion
• support for two fiber pairs allowing modules daisy-chaining
• communication range between transmitter and receiver up to 2 km
• high immunity to interference
• full galvanic isolation
• supported also by the ACCO (RS-485)
• supported by INTEGRA and VERSA control panels
• TCP/IP reporting
• DLOADX remote programming
• GUARDX remote supervision
• ability to operate the INTEGRA based system from WWW browser and mobile phone using the INTEGRA CONTROL application
• encrypted data transmission
• support for DHCP automatic address configuration
• open protocol for systems integration via the TCP/IP channel
• transmission of signals from a telephone dialer via GSM network
• conversion of PAGER messages to SMS
• remote module configuration via GPRS
• remote programming of control panels via GPRS
• "remote RS-232 port" function
• remote update of module firmware
• KNX actuators control with INTEGRA system,
• receiving of KNX sensors messages by INTEGRA panel,
• KNX bus interfacing via BTM „Bus coupling unit” module,
• INT-KNX configuration with DloadX
نشانی: تهران، خیابان شهید بهشتی، خیابان کاووسی فر، پلاک 23
تلفن: 22276534-021 22255495-021 info 'at' sahba-co 'dot' com