• 8 monitoring triggering or message inputs
• dedicated inputs for alarm system failure signals
• dedicated input for AC power supply monitoring
• 4 outputs with remote control option
• automatic switching to SMS in case of lack of GPRS signal
• SMS/CLIP messaging
• sending test transmission using CLIP
• communication failure signalling
• built-in 2 A buffer power supply
• two separate, programmable channels
• support for up to 340 keyfobs
• operating range up to 200 m open space
• remote low battery indication
• arm/disarm/reset confirmation
• RS-232 for programming and keyfob management
• 4-channel
• KEELOQ® dynamic code-hopping technology
○ ideal for security demanding applications
○ high immunity to interference signals
• SAW Resonator frequency stabilization
○ immunity to environmental changes
• powered by single A23 12 V battery
• high efficiency mains powered switching mode power supply with 24 V DC output
• 5 A power supply capacity
• short circuit, overload and overheat protection
• desgined for use with sealed lead-acid batteries
• current controlled battery charging circuit
• battery deep discharge protection
• 4 OC outputs for remote supervision
• optical indication for mains, battery, overload and overheating status
• acoustic failure indication
• telephone line monitoring conversion to TCP/IP transmission, compatible with any panel
• 8 zones for triggering of TCP/IP reporting
• support for SSL encryption protocol during communication with the outgoing mail server (only ETHM-2 FLASH v2.00)
• remote control via web browser (only ETHM-2 FLASH v1.02)
• unit configuration via ETHM-2 SOFT
• local configuration via RS-232
• encrypted data transmission
• 4 independent channels with a relay output
• Outputs can be configured for monostable mode (on time) or bistable mode (On/Off)
• Support for up to 340 key fobs which can be managed using PC computer
• Key fob low battery indication
• Acknowledgement of arming / disarming
• PC configuration
• Operating range up to 300 m in open area
• 2-channel
• KEELOQ® dynamic code-hopping technology
○ ideal for security demanding applications
○ high immunity to interference signals
• SAW Resonator frequency stabilization
○ immunity to environmental changes
• powered by single 12 V battery
• EN50131-6 Grade 2 compliant
• high efficiency mains powered switching mode power supply with 12 V DC output
• 10 A power supply capacity
• short circuit, overload and overheat protection
• desgined for use with sealed lead-acid batteries
• current controlled battery charging circuit
• battery deep discharge protection
• 4 OC outputs for remote supervision
• optical indication for mains, battery, overload and overheating status
• acoustic failure indication
• interfaces PSTN devices with ISDN network
• shares ISDN network with other devices (telephones, fax machines, modems)
• optional priority alarm calls
• support for point-to-point and point-to-multipoint mode configurations
• external modem functionality for INTEGRA panels
• RS-232 port for panels upload/download
• output for optional line separation module
• 2 independent channels with a relay output
• Outputs can be configured for monostable mode (on time) or bistable mode (On/Off)
• Support for up to 340 key fobs which can be managed using PC computer
• Key fob low battery indication
• Acknowledgement of arming / disarming
• PC configuration
• Operating range up to 300 m in open area
• 4-channel
• KEELOQ® dynamic code-hopping technology
○ ideal for security demanding applications
○ high immunity to interference signals
• SAW Resonator frequency stabilization
○ immunity to environmental changes
• powered by single 12 V battery
• 230 V/20 V AC, 40 VA
• for OPU-3 P and OPU-4 P enclosures
• four separate, programmable channels
• support for up to 340 keyfobs
• operating range up to 200 m open space
• remote low battery indication
• arm/disarm/reset confirmation
• RS-232 for programming and keyfob management
• 2-channel
• KEELOQ® dynamic code-hopping technology
○ ideal for security demanding applications
○ high immunity to interference signals
• SAW Resonator frequency stabilization
○ immunity to environmental changes
• powered by single A23 12 V battery
• EN50131-6 Grade 2 compliant
• high efficiency 12 V DC switching mode power supply, requiring no mains transformer
• 4 A total output current
• short circuit and overload protection
• designed for use with sealed lead-acid batteries
• optionally selected battery charging current
• battery deep discharge protection
• 3 OC outputs for trouble indication
• optical indication of mains, battery and overload status
• audible trouble signal
• dedicated connector for use with new SATEL modules
• designed for mounting on DIN 35 mm rail and in OPU-3 P, OPU-4 P and OPU-4 PW enclosures
نشانی: تهران، خیابان شهید بهشتی، خیابان کاووسی فر، پلاک 23
تلفن: 22276534-021 22255495-021 info 'at' sahba-co 'dot' com