CA-64 O-OC
• system expansion with 8 outputs
○ 8 low current OC outputs

• system expansion with 8 outputs
○ 8 low current OC outputs
• system expansion with 8 outputs
○ 4 relay and 4 low current OC outputs
• switching mode power supply
• system expansion with 8 outputs:
○ 8 low current outputs, OC type
○ up to 8 relay outputs
○ each OC type output is connected in parallel to relay output
○ capability to reduce power consumption by disabling support for selected relay outputs
• ability to connect to RS-485 bus (firmware update via the bus)
• system expansion with 8 zones
• support for:
○ NO, NC
○ EOL, 2EOL/NO, 2EOL/NC (alarm control panels only)
○ 3EOL (INTEGRA Plus only)
• programmable EOL resistance value (alarm control panels only)
• support for vibration and roller shutter detectors (alarm control panels only)
• ability to connect to RS-485 bus (firmware update via the bus)
• supports up to 48 wireless devices
• 4 up to 24 control inputs (NO/NC)
• 8 up to 48 programmable outputs (OC type)
• 4 predefined functional outputs indicating:
○ tamper
○ communication problem
○ radio jamming
○ low battery condition
• communication bus for INTEGRA, VERSA and CA-10 panels
• support for virtually any intruder control panel by hardwiring controller outputs with panel zones
• system settings programming
○ LCD keypad connected directly to the controller for programming only
○ LCD keypad of INTEGRA panels in service mode
○ PC with DLOAD10 connected to controller's RS-232 for programming only
○ PC with DLOADXconnected to INTEGRA control panel for upload/download
• RS-232 port with optical isolation
• FLASH based firmware for easy updates
• system expansion with 8 zones
• support for NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations
• programmable EOL resistance value
• pulse analysis with sensitivity setting for vibration and roller shutter sensors
• switching mode power supply
• support for:
○ NO, NC
○ EOL, 2EOL/NO, 2EOL/NC (alarm control panels only)
○ 3EOL (INTEGRA Plus only)
• support for roller shutter and vibration detectors (alarm control panels only)
• system expansion with 8 zones
• system expansion with 8 outputs:
○ 4 OC type outputs
○ 4 relay outputs
• ability to connect to RS-485 bus (firmware update via the bus)
• dedicated independent bus for addressable detectors
• support for up to 48 addressable zones
• switching mode power supply
• 8 relay outputs for direct control of 230 V mains powered appliances
• 8 programmable zones
• installation directly on 35 mm DIN rail
• optical indicators of relay state
• converts standard (NO, NC) detector into addressable detector
• installs inside detector enclosure
• compatible with INT-ADR, CA-64 ADR addressable bus module
• system expansion with 8 outputs
○ 8 relay outputs
• switching mode power supply
• 8 relay outputs for direct control of 230 V mains powered appliances
• 8 programmable zones
• installation directly on 35 mm DIN rail
• optical indicators of relay state
• dedicated independent addressable detector bus
• support for addressable detectors based on CA-64 ADR-MOD module
• capability of system expansion with up to 48 addressable zones
• ability to connect to RS-485 bus (firmware update via the bus)
نشانی: تهران، خیابان شهید بهشتی، خیابان کاووسی فر، پلاک 23
تلفن: 22276534-021 22255495-021 info 'at' sahba-co 'dot' com