• transmission of signals from a telephone dialer via GSM network
• conversion of PAGER messages to SMS
• remote module configuration via GPRS
• remote programming of control panels via GPRS
• "remote RS-232 port" function
• remote update of module firmware
• KNX actuators control with INTEGRA system,
• receiving of KNX sensors messages by INTEGRA panel,
• KNX bus interfacing via BTM „Bus coupling unit” module,
• INT-KNX configuration with DloadX
• LEDs for door state indication
• keypad hold-down PANIC, FIRE and AUX alarms
• buzzer for door left open indication
• relay for electromagnetic lock/electric strike
• door control input
• installed directly on wall/door frame
• communication format: EM Marin
• support for 125 kHz proximity cards/tags
• optional CZ-EMM POD spacer pad available
• simulation of analog telephone line over GSM network
• 4 programmable inputs for triggering of messaging and/or GPRS reporting
• telephone line monitoring conversion to GPRS transmission, compatible with any panel
• CallerID forwarding to simulated telephone line (DTMF and FSK systems)
• PAGER (DTMF) messaging conversion to SMS
• support for CLIP test transmissions
• SMS reception for central monitoring station
• external modem functionality for INTEGRA panels
• RS-232 port for module programming and modem functionality
• RS-232 interface installed on keypad bus
• GUARDX communication
• RS-232 based monitoring support
• open protocol for systems integration
• installed directly on wall/door frame
• communication format: EM Marin
• access authorization with proximity card
• support for 125 kHz proximity cards/tags
• doorbell button
• outdoor operation
• support for two proximity card / iButton chip readers
• compatible with Wiegand 26 format readers
• relay to control electromagnetic door lockinput for door status control
• input for door opening with a buttoncapability to automatically open the door in case of fire alarm
• tamper input
• transmission of signals from a telephone dialer via GSM network
• conversion of PAGER messages to SMS
• remote module configuration via GPRS
• remote programming of control panels via GPRS - "remote RS-232 port" function
• remote update of module firmware
• telephone line supervision and automatic switch-over to GSM at fault
• telephone reporting conversion to SMS, GPRS and CSD formats
• 4 module inputs with ability to start voice / SMS messaging and to trigger event transmission when reporting
• 3 outputs with remote control capability
• RS-232/485 interface connected to keypad bus
• communication with the GUARDX program
• monitoring support by RS-232
• open protocol for integration with other systems (requires implementation of RS-232 protocol on the third-party system side)
• galvanic isolation protecting against the potential difference
• installed directly on wall/door frame
• communication format: EM Marin
• access authorization with proximity card
• support for 125 kHz proximity cards/tags
• outdoor operation
• EN50131 Grade 2 compliance
• 5 zones expandable up to 30:
○ NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations
○ support for vibration and roller shutter detectors
○ detectors supervision
• additional tamper input
• 4 up to 12 programmable outputs
• 2 supply outputs
• 2 partitions:
○ 3 arming modes for each partition
○ arming/disarming by users or timer controlled
• communication bus for keypads, readers and expansion modules
• RS-232 port (RJ type socket) for panel programming built-in telephone dialer for:
○ reporting (SIA, ContactID, other)
○ personal messaging (8 telephone numbers, 64 text/16 voice messages)
○ remote programming (built-in 300 bps modem)
• support for GSM/GPRS communicator:
○ SMS/GPRS reporting
vvoice/SMS messaging
• support for TCP/IP communicator:
○ e-mail messaging
○ TCP/IP reporting
• system operation via:
○ LCD or LED keypads (up to 6)
○ VERSA-LCDM-WRL wireless keypads (VERSA 5 Firmware v1.04 or newer)
○ INT-TSG touchscreen keypads (INT-TSG Firmware v1.03 or newer, VERSA 5 Firmware v1.04 or newer)
○ proximity tags/cards (up to 6 readers)
○ remote control key fobs
• easy update of firmware for enhancing the panel with new features
• support for 31 user codes:
○ 30 standard users
○ 1 installer
• individual naming for easy system operation and management
• timers:
○ 4 timers with holidays support
• event log with 2047 entries
• automatic diagnostics of basic system components
• built-in 1 A switching mode power supply:
○ overload protection
○ deep discharge protection
○ battery charging supervision
• option of not reporting server SATEL failure to the control panel (VERSA Firmware 1.08 or newer)
• GSM backup for telephone line
• support for two SIM cards
• telephone line supervision with automatic switching to GSM
• 4 programmable inputs
• telephone reporting conversion to SMS/GPRS/CSD
• 3 outputs for DTMF/SMS/CLIP remote control
• pager (DTMF) to SMS conversion
• CLIP test transmissions
• modem feature for INTEGRA panels unit configuration with buttons or PC
• INTEGRA keypad and expansion buses to fiber-optic conversion
• support for two fiber pairs allowing modules daisy-chaining
• communication range between transmitter and receiver up to 2 km
• high immunity to interference
• full galvanic isolation
• supported also by the ACCO (RS-485)
• installed directly on wall/door frame
• communication format: EM Marin
• support for 125 kHz proximity cards/tags
نشانی: تهران، خیابان شهید بهشتی، خیابان کاووسی فر، پلاک 23
تلفن: 22276534-021 22255495-021 info 'at' sahba-co 'dot' com