CA-64 ADR
• dedicated independent bus for addressable detectors
• support for up to 48 addressable zones
• switching mode power supply

• dedicated independent bus for addressable detectors
• support for up to 48 addressable zones
• switching mode power supply
• 8 relay outputs for direct control of 230 V mains powered appliances
• 8 programmable zones
• installation directly on 35 mm DIN rail
• optical indicators of relay state
• converts standard (NO, NC) detector into addressable detector
• installs inside detector enclosure
• compatible with INT-ADR, CA-64 ADR addressable bus module
• ability to record up to 32 messages
• triggering messages with the INTEGRA alarm control panel or other external devices
• built-in amplifier allows direct connection of a loudspeaker
• line output for easy connection to a PA system
• built-in USB port for quick programming with a computer
• system expansion with 8 outputs
○ 8 relay outputs
• switching mode power supply
• 8 relay outputs for direct control of 230 V mains powered appliances
• 8 programmable zones
• installation directly on 35 mm DIN rail
• optical indicators of relay state
• dedicated independent addressable detector bus
• support for addressable detectors based on CA-64 ADR-MOD module
• capability of system expansion with up to 48 addressable zones
• ability to connect to RS-485 bus (firmware update via the bus)
• two-way transmission of audio signals between the intercoms and the telephone line
• two-way communication activation button
• up to 4 INT-AVT panels may be connected to the INT-AV module
• system expansion with 8 outputs
○ 4 relay and 4 low current OC outputs
• switching mode power supply
• system expansion with 8 outputs:
○ 8 low current outputs, OC type
○ up to 8 relay outputs
○ each OC type output is connected in parallel to relay output
○ capability to reduce power consumption by disabling support for selected relay outputs
• ability to connect to RS-485 bus (firmware update via the bus)
• system expansion with 8 zones
• support for:
○ NO, NC
○ EOL, 2EOL/NO, 2EOL/NC (alarm control panels only)
○ 3EOL (INTEGRA Plus only)
• programmable EOL resistance value (alarm control panels only)
• support for vibration and roller shutter detectors (alarm control panels only)
• ability to connect to RS-485 bus (firmware update via the bus)
• alarm acoustic verification module enables the elimination of false alarms
• local broadcasting of messages from the monitoring station
• two-way transmission of audio signals between the intercoms and the telephone line
• works with up to 4 intercoms working in half duplex mode
• microphone sabotage detection function
• system expansion with 8 zones
• support for NO, NC, EOL, 2EOL/NO, 2EOL/NC zone configurations
• programmable EOL resistance value
• pulse analysis with sensitivity setting for vibration and roller shutter sensors
• switching mode power supply
• support for:
○ NO, NC
○ EOL, 2EOL/NO, 2EOL/NC (alarm control panels only)
○ 3EOL (INTEGRA Plus only)
• support for roller shutter and vibration detectors (alarm control panels only)
• system expansion with 8 zones
• system expansion with 8 outputs:
○ 4 OC type outputs
○ 4 relay outputs
• ability to connect to RS-485 bus (firmware update via the bus)
• supported by INTEGRA and VERSA control panels
• TCP/IP reporting
• DLOADX remote programming
• GUARDX remote supervision
• ability to operate the INTEGRA based system from WWW browser and mobile phone using the INTEGRA CONTROL application
• encrypted data transmission
• support for DHCP automatic address configuration
• open protocol for systems integration via the TCP/IP channel
نشانی: تهران، خیابان شهید بهشتی، خیابان کاووسی فر، پلاک 23
تلفن: 22276534-021 22255495-021 info 'at' sahba-co 'dot' com